Type 46
On both sides female thread, PN 16, ends malleable cast iron/steel galvanizes
Type 46 rot Aramid: EPDM/Aramid/EPDM, max. 110°C, for hot water
Type 46 rot Nylon: EPDM/Nylon/EPDM, max. 90°C, for warm water
Type 46 gelb Nylon: NBR/Nylon/CR, max. 90°C, for oil and gas
Type 46 grau Nylon: CR/Nylon/CR, max. 70°C, for warm water
Type 270
Axial expansion joint, on both sides female thread, PN 16, bellow: 1.4571,
female thread: carbon steel, inner sleeve: carbon steel, outer cover: aluminium
Type 50
With flanges, PN 10, flanges steel galvanized
Type 50 red PEEK (Sp): EPDM/PEEK/EPDM, max. 110°C, for hot water
Type 50 red Polymide: IIR/Polyamide/EPDM, max. 90°C, for warm water, drinking water approval
Type 50 yellow: NBR/Polyamide/CR, max. 80°C, for oil and gas
Type 50 green: CSM/Polyamide/CSM, max. 80°C, for chemical industry
Type 50 white: NBR/Polyamide/CR, max. 80°C, for foods and beverages
Type 50 black CR: CR/Polyamide/CR, max. 70°C, for oil and gas
Type 50 black EPDM: IIR/Polyamide/EPDM, max. 85°C, for water pipes
Type 60
PN 10, Rubber parts: EPDM, with vulcanized flange rings
Type 60 WRG: with TÜV-approval certificate for heating plants with 100°C at 10 bar
Type 60 WRG-2: without TÜV
Type 80
With flanges, PN 10, bellow: PTFE, flanges steel S235JRG with rost proof painting and integral restraint,
with stainless steel flanges on request
Type 208
With loose flanges, PN 10/16, bellow: 1.4541 one-layer, flanges: steel galvanized,
with stainless steel flanges on request
Type 212
With loose flanges, PN 16, bellow: 1.4541 multi-ply, flanges: steel galvanized,
with stainless steel flanges on request
Type 206
With weld ends, PN 16, bellow: 1.4541 one-layer (DN20-50) or multi-ply (DN 65-300),
weld ends: steel, with stainless steel ends on request
