With 4 holes, face to face according to EN 558-1 (K1), suitable between flanges PN 6/10/16, from DN 350 PN 10 (PN 16 on request), topflange according to ISO 5211, with handlever, from DN 250 with ...
With threaded holes, face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, from DN 200 PN 10 (PN 16 on request), topflange according to ISO 5211, with handlever, from DN 250 ...
Available from DN 100, face to face according to EN 558-1/13, suitable between flanges PN 10 or 16, topflange according to ISO 5211, with handlever, from DN 250 with worm gear PA-1160.226.E: body: ...
Available from DN 250, face to face according to EN 558-1 (K1), suitable between flanges PN 10 (PN 16 on request), topflange according to ISO 5211, with worm gear PA-1170.126.E: body: GGG-50 EKB, ...
With 4 holes (wafer type), face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, topflange according to ISO 5211, with handlever, from DN 250 with gear, temperature: -15°C up to ...
With 4 holes (wafer type), face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, topflange according to ISO 5211, with handlever, from DN 250 with gear, temperature: -15°C up to ...
Threaded holes (lug type), face to face according to EN 558-1 (K1), suitable between flanges PN 10 or 16, topflange according to ISO 5211, with handlever, from DN 250 with gear, temperature: -15°C up ...
Threaded holes (lug type), face to face according to EN 558-1 (K1), suitable between flanges PN 10 or 16, topflange according to ISO 5211, with handlever, from DN 250 with gear, temperature: -15°C up ...
For abrasive media like cement, ash or sand, with 4 holes (wafer type) face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, topflange according to ISO 5211, with handlever, ...
Type PA-924B
With 4 holes (wafer type), face to face according EN 558-1 (K1), suitable between flanges PN 6/10/16,
topflange according ISO 5211, with handlever, from DN 250 gearbox, body: 0.7040 EKB,
...
Type PA-924T
With threaded holes (lug type), face to face according EN 558-1 (K1),
suitable between flanges PN 10 or 16, topflange according ISO 5211,
with handlever, from DN 250 gearbox,
body: 0.7040 ...
Type PA-994B
With 4 holes (wafer type), face to face according EN 558-1 (K1),
suitable between flanges PN 6/10/16, topflange according ISO 5211,
with handlever, from DN 250 gearbox
body: 0.7040 EKB, ...
Type PA-994T
With threaded holes (lug type), face to face according EN 558-1 (K1),
suitable between flanges PN 10 or 16, topflange according ISO 5211,
with handlever, from DN 250 with gearbox
body: 0. ...
DN 150-3000, face to face according to EN 558-1/14 (F4), flanged ends PN 10 or PN 16, topflange according to ISO 5211, with worm gear,
PA-2010.122: body: GGG-50 EKB, disc: GGG-50 EKB, seat: EPDM, ...
With 2 holes, from DN 350 with 4 threaded holes, face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, from DN 350 PN 10 or PN 16, topflange according to ISO 5211, with ...
With threaded holes, face to face according to EN 558-1 (K1), suitable between flanges PN 10/16, from DN 200 PN 10 or PN 16, topflange according to ISO 5211, with handlever, from DN 200 with ...